Jeep Window Vinyl Themed Decal Pre Cut to Fit

Jeep Window Vinyl Themed Decal

Current design fits a 18-current Jeep Wrangler JLU. 

Sold as a pair

Show off your Jeep pride with our Jeep Wrangler Window Theme Vinyl Decal – the perfect finishing touch for any true Jeep enthusiast. Designed to fit your rear  side windows.

Whether you’re crawling through trails or cruising the streets, this decal adds a custom look that stands out from the rest.

• Precision-cut from premium outdoor vinyl for long-lasting durability
• Weatherproof & fade-resistant – built to handle sun, snow, and mud
• Easy to apply and remove without leaving sticky residue

Fits back quarter window  sold in pairs  

Vinyl Decal Installation Instructions

Follow these simple steps to get a clean, bubble-free install on your Jeep Wrangler window:

What You’ll Need:

• Decal
• Squeegee or credit card
• Masking Tape
• Razor blade for trimming
• Rubbing alcohol or glass cleaner
• Microfiber cloth

Step-by-Step Installation:

1. Clean the Surface

Thoroughly clean the window using glass cleaner or rubbing alcohol. Dry with a microfiber cloth to remove all dust, dirt, and oils.

Tip: The cleaner the surface, the longer the decal will last.

2. Position the Decal

Without removing the backing, place the decal on the window where you’d like it to go. Trim if necessary. Use masking tape to hold it in place and create a hinge on the top edge.

3. Peel the Backing

Flip the decal up using the tape hinge and slowly peel the backing paper away, making sure the decal stays on the clear transfer tape.

4. Apply the Decal

Carefully lay the decal down from top to bottom, using a squeegee or credit card to press and smooth it onto the glass as you go. Work slowly to avoid air bubbles.

5. Remove the Transfer Tape

Once the decal is firmly pressed down, slowly peel off the clear transfer tape at a sharp angle. If any part lifts, press it back down and wait a few minutes before trying again.

6. Final Touch

Smooth out any small bubbles with your fingers or squeegee.  Most small bubbles will disappear within 24–48 hours in sunlight.

Tips for Best Results:

• Apply in temperatures between 50°F and 85°F
• Avoid applying in direct sunlight or during high humidity
• Let the decal cure for 24 hours before washing the vehicle